Emtek Ridgemont Tubular Handleset with Montrose Lever
- Handing Required if Lever Used on Inside or if Interconnect Device is Specified
- Fits standard door thickness of 1-3/4”. Specify if thicker
- Standard 2-1/8” door prep. Standard latch is for 2-3/8”backset. Specify 2-3/4”backset if required
- 28 Degree rotation latch not available for use with Tubular Entrance Handlesets
- Standard 2-1/8" Door Prep
- Schlage C Keyway
Single Cylinder Keyed
- Features key way on the exterior side
- Thumb turn on the interior
- Standard application for a tubular door
- Often paired with a dummy set for symmetry on double entry doors
Double Cylinder Keyed
- Key way cylinder on the exterior deadbolt
- Key way cylinder on the interior side
- No thumbturn on interior side
- Will need a key on both sides of the door to open the door
- Common on glass entry doors
Dummy
- Dummy sets have no latch and require no bore hole
- Surface mounted to the door
- Often used in conjunction with a passage or privacy set for double or french doors
- Acts as a jamb, with a strikeplate for the other door's latch to fit into
SPECIFICATIONS
- Emtek Tubular Entrance Handlesets Dimensions/Door Thickness Specifications
- Emtek Tubular Entrance Handlesets Strike Plates Specifications
- Proposition 65
INSTALLATION MANUAL
- Emtek Tubular Sectional Tubular Entry Set - Single Cylinder Installation Instructions
- Emtek Tubular Entry Set Models
- Emtek Tubular Sectional Entry Set - Double Cylinder Installation Instructions
- Emtek Tubular Monolithic and Sectional Dummy Entry Set Installation Instructions
- Emtek Tubular Entry Sets Door Prep - Right Hand
- Emtek Tubular Entry Sets Door Prep - Left Hand
Reviews
There are no reviews yet.